Whether delivered online or on-site, our instructor-led live Industrial Automation courses provide a practical and interactive learning experience. Participants engage in detailed discussions and hands-on exercises to master the programming of control systems, including computers and robotic systems.
Industrial Automation training is offered in two formats: "online live training" and "onsite live training". Online live training, also referred to as "remote live training", utilizes an interactive remote desktop environment. Onsite live training can be conducted either at your local premises in Athens or within NobleProg's corporate training centers located in Athens.
Take Metro Line 3 (M3) from Airport toward Dimotiko Theatro.
Get off at Evangelismos.
The address is on Vasilissis Sofias Avenue, very close to the station. Evangelismos station is directly on the avenue.
Allow roughly 40–50 minutes total, depending on waiting/walking time.
From Athens Central Railway Station (Larissa Station)
Take the metro to Syntagma and change to Line 3 toward Doukissis Plakentias/Airport.
Get off at Evangelismos.
Walk to No. 46.
By bus
There are several buses running along Vasilissis Sofias Avenue. Nearby stops include Rigilis Street and Syntagma, while the Evangelismos area is served by multiple bus routes.
The metro is generally the simplest option, especially if you're arriving with luggage.
This practical training in Athens addresses ROS-PLC integration and digital twins within the context of industrial automation. Participants will learn to synchronize robotic systems with PLCs, create digital replicas for simulation, and enhance production workflows via real-time data exchange and advanced monitoring techniques.
This live, instructor-led training in Athens provides beginner-level decision-makers with a strategic introduction to AI in smart factories. Participants will delve into core ML principles, identify key manufacturing use cases, and discover practical steps for launching AI-driven initiatives to enhance industrial operations.
This instructor-led, live training in Athens (online or onsite) is designed for intermediate to advanced engineers and technicians seeking to master the programming, operation, and optimization of Fanuc and Epson robotic systems for industrial applications.
Upon completion of this training, participants will be able to:
Comprehend the architecture and functionalities of Fanuc and Epson robots.
Program robot movements, logic, and sensor integrations.
Implement safety protocols and troubleshooting techniques.
This live, instructor-led training in Athens focuses on RTU configuration, I/O mapping, and SCADA integration. Learners will gain proficiency in communication protocols, logic implementation, and troubleshooting techniques to ensure reliable automation and control within power system environments.
This instructor-led session on Athens focuses on integrating Allen Bradley devices over Ethernet. Participants will learn to configure PLCs, HMIs, and routers for effective communication, while enhancing practical abilities in network topology, data handling, and troubleshooting within industrial automation frameworks.
This instructor-led, live training in Athens (online or onsite) is designed for intermediate-level automation engineers and control system designers who wish to implement motion control solutions using Omron PLCs.
Upon completion of this training, participants will be capable of:
Grasping core motion control concepts and their practical applications.
Configuring motion hardware and software within Sysmac Studio.
Programming and optimizing both single-axis and multi-axis motion control.
Deploying coordinated motion strategies, including interpolation and synchronization.
This instructor-led, live training in Greece (online or onsite) is designed for engineers and technicians at beginner to intermediate levels who aim to master the fundamentals of AB PLCs and apply them to practical manufacturing scenarios.
Upon completion of this training, participants will be capable of:
Grasping the function and applications of AB PLCs within the manufacturing sector.
Programming AB PLCs using RSLogix 5000/Studio 5000.
Troubleshooting frequent issues and performing maintenance on PLC systems.
Designing and implementing a PLC-controlled system for a manufacturing process.
Demonstrating proficiency in PLC programming through a practical project.
This instructor-led, live training in Athens (online or onsite) is aimed at automation engineers and control system designers who wish to configure, program, and commission Omron Sysmac systems covering NJ/NX controllers, EtherCAT networking, G5/1S/1SA servo drives, NA Series HMI, and NX safety hardware.
Developed by Vector, CANoe is a robust software solution designed for the development, testing, and analysis of in-vehicle networks and Electronic Control Units (ECUs), particularly those utilizing the CAN (Controller Area Network) protocol.
This live, instructor-led training, available both online and on-site, targets beginner to intermediate-level automotive engineers and testers looking to leverage CANoe for simulating, testing, and analyzing CAN-based communication systems.
Upon completing this training, participants will be equipped to:
Install and configure CANoe along with its associated components
Grasp the fundamental concepts of the CAN protocol and message framing
Develop simulations for ECUs and CAN networks using CAPL scripting
Monitor, analyze, and troubleshoot CAN traffic efficiently
This instructor-led live training in Athens (online or onsite) is designed for beginner-level, intermediate-level, and advanced-level engineers and technicians who wish to use XGT Series PLCs to configure hardware, manage modules, and maintain stable PLC systems.
By the end of this training, participants will be able to identify XGT hardware components, configure PLC system modules, perform backup and diagnostic tasks, and troubleshoot common hardware issues.
This instructor-led, live training in Athens (online or onsite) targets PLC users seeking to utilize XG5000 for the creation, testing, downloading, monitoring, and troubleshooting of PLC programs.
By the end of this training, participants will be able to create and manage projects, configure hardware and communication settings, develop ladder logic, and diagnose PLC faults.
Master the essentials of OMRON PLC programming in Athens, gaining proficiency in Ladder Diagram logic, hardware configuration, and industrial automation applications. This course is perfectly suited for engineers and specialists looking to acquire practical experience with CX-ONE, memory management, and pneumatic control systems for real-world deployment.
This instructor-led live training, hosted in Luxembourg, targets engineers, technicians, and automation professionals at beginner to intermediate levels who intend to use Python to tackle technical issues, automate repetitive processes, and manage industrial data.
By the end of this course, participants will be able to:
Write clear and organized Python scripts for technical scenarios
Apply programming logic to engineering-focused challenges
Leverage Python to process data from CSVs, logs, and text files
Automate routine engineering and automation processes
This instructor-led live training in Athens provides comprehensive coverage of Siemens S7-1500 PLC programming, TIA Portal, HMI operations, and variable frequency drive diagnostics. It empowers maintenance and automation personnel to independently troubleshoot faults in automated production and packaging equipment.
Online Industrial Automation training in Athens, Industrial Automation training courses in Athens, Weekend Industrial Automation courses in Athens, Evening Industrial Automation training in Athens, Industrial Automation instructor-led in Athens, Industrial Automation coaching in Athens, Evening Industrial Automation courses in Athens, Industrial Automation one on one training in Athens, Industrial Automation instructor in Athens, Weekend Industrial Automation training in Athens, Industrial Automation private courses in Athens, Industrial Automation instructor-led in Athens, Industrial Automation trainer in Athens, Online Industrial Automation training in Athens, Industrial Automation on-site in Athens, Industrial Automation boot camp in Athens, Industrial Automation classes in Athens
